Log in
Log in

or
Create an account

or
Learning
5 comments

Surviving as a Hired Gun in the Studio

Advice on How to be Successful as a Studio Musician

Between the proliferation of home studios, digital music technology, the Internet, and the development of music genres that are programmed rather than played, the amount of session work available, as compared to 20 or 30 years ago, has diminished considerably. The days of live players being used on every session are long gone. Still, there are lots of projects going on that use live musicians, and it's great work when you can get it.

Playing a session as a hired studio musician is exciting, but often takes place in a highly pressurized and stressful environment, where your playing is scrutinized in a much more intense way then when you’re playing live. If you don’t have much or any experience playing sessions, the tips and advice in this article will help you ace it when you get the call.

Charted territory

One of the toughest parts about session work is walking into a studio and playing a piece of music that you’ve never heard or played before, and doing it well. Depending on your instrument, you’ll likely get something written out, whether it’s a simple chord chart or a full-blown lead sheet. Sometimes, for guitar sessions, I’ve gotten only a lyric sheet with chords written above the words, and no rhythmic notation at all. In some ways, the less detail you’re given the better, because without a part already written, your creativity comes into play more.

In any case, since you’re being paid to play on a song or commercial or whatever it is, there’s an expectation that you’ll be able to look at the music, perhaps listen to some reference, and nail your part pretty quickly. If it’s just a friend’s demo, it should be a pretty low key and relaxed experience. But it’s for a commercial or an album session for people you don’t know, especially if you’ve been hired based on your reputation or a referral from a third party, you’re expected to do a good job and get it done quickly, so the pressure will definitely be on.

If you’re a great reader, and you’re playing a part that’s totally written out, it probably won’t be that hard for you, but if your reading skills aren’t on par with your musicianship, and you’re constantly playing a phrase incorrectly or starting in the wrong place, it can become tense quickly. If you don’t read at all, don’t accept a session where you know reading will be required, or it will be a debacle.

Tips and advice

Here are a few things to keep in mind when you play a session.

  • Prepare before the session.  Try to get the music in advance. If you’re overdubbing on a song project, chances are that at least the basic tracks have been recorded already, and you might be able to get an audio file and a chart a few days prior to the date. If you’re able to do that, put in the necessary practice time to get as familiar with it as you can in advance. You’ll go into the session a lot more confident, if you already know the music when you get there. If it’s a commercial or a film score, you probably can’t get music beforehand.
  • Look for trouble spots. As soon as you are setup and ready, read over the chart and identify sections that might be difficult for you. Look for the sections that have the most difficult figures in them, and before the session gets underway, try to work out how you’re going to play them.
  • Appear confident. It’s important for your reputation to give off an air of confidence during a session, even if you’re internally very nervous. Don’t overly apologize for mistakes, and act like you know what you’re doing at all times. It’s easier said than done, but it’s something you should strive for.
  • Divide and conquer. This advice won’t be relevant in all situations, but if you’re overdubbing an improvised instrumental solo part, you might find that the pressure of being under the microscope is causing you to tense up and make mistakes, or not be able to come up with good lines. If that’s happening to you, take a deep breath, and try simplifying your part a little bit, if possible. If you can get the first few measures down, you can ask to punch in the rest. Visualize the solo in smaller chunks, and you might feel like it’s less of a mountain to climb.
  • Follow direction. When you’re being hired to play on somebody else’s music, you are expected to play the way the client or producer ask you to, and you have to evaluate the particular circumstances of the session to know if you’ve got leeway to make suggestions. If it’s a part that’s written out, play it as written. If you’re a soloist, you have more room to put in your ideas, obviously, but if the producer gives you a direction like “make that line less busy, ” or “you’ve got to be out by the fourth beat of bar 21,” its probably not wise to say, “I don’t think that’s a good idea.” After you’ve played it the producer’s way, you could say, “What do you think of this idea?” Some producers will be receptive, but others won’t. 

Coda

These days, a lot of session work happens remotely, where tracks are sent to you to play to, and then when you’re done you send the file of your part back to the producer. While there are some real-time solutions for remote playing, most of remote sessions will be offline, so you can work on your own time to get your part done. Doing so takes a lot of the pressure out of the session. The only downside is that you might end up spending a lot more time on it than you would have if you traveled to a studio to play.

Despite there being less session work than in past years, if you’re a good player and you’re busy on your local music scene, you may very well get called for a studio gig. If you do a good job, you can build your reputation, and get more work through word of mouth. 


Would you like to comment this article?

Log in
Become a member