Log in
Log in

or
Create an account

or
< All Allen & Heath Xone:32 (Old Design) reviews
Add this product to
  • My former gear
  • My current gear
  • My wishlist
Allen & Heath Xone:32 (Old Design)
Images
1/92
Allen & Heath Xone:32 (Old Design)

3-Channel Mixer from Allen & Heath belonging to the Xone series

Babatek Babatek
Published on 03/10/06 at 01:04
It is a good mixer primarily to house and techno. We are facing a good quality audio trs and although the quality of manufacture is trs good it is not for us to play the hardtek above.
No it is not rack and it shows.
APRS she has three votes online / phone back with More than micro.
The connector is RCA outputs (master, booth, record) are Jack and RCA. I was surprised when I got to have a common ground, but it is easily leads connected and I've never had a weight problem.
Good qualiseur with buttons surroundings of caoutchoux, it is made to mix with finesse. It has room to work.
This is a table that is soft to the touch, it is working fine and finger.
Then it filters passband up / midle / severe when used it seems to be an effect of studio time, quality and allows irrprochable also can delete compltement either the bass or acute. It takes a little time to good use especially rgler filters.
APRS there is a filter LFO but we must get the beat by tapping a touch unfortunate that this is not synchronized. I use it rarely, except for hatching the sound trs high speed once.

Good quality good sound, we feel like the leads connected a stereo amp has a sound system.

UTILIZATION

The configuration is very simple. A small point even when the gain is the talble derrire situ. They wanted more room to work. Well once the gains are rgls you touch it more.
The manual is clear, we need a good can understand how to use filters and especially the buttons that allow mmorisations enclcher at once such as voice filter.

SOUNDS

The console is clear, no breath, and a good mass trs. The qualiseur does not go down trs (-26) but the filters can be cut low as desired.

OVERALL OPINION

I use it for 3 years. Not a single worry.
Small default that can be right and gain even rsoudrte which is located just derrire the table, but just by looking above we see and can easily be shaken and the qualiseur trs not going down there but that can be easily corrected with filters.
Before I had a TSB, m. ... with faders that scrapes, I had an APRS SMAC PRO4, trs well but we had no cue to the pfl mix. galre and the l. Now I get involved in over live so I may still change and I mix less and less.