Barco announced the introduction of a new line MatrixPRO-II 3G/HD/SD-SDI and Analog routers.
The MatrixPRO-II series is designed to provide a flexible and dependable routing solution of 3G/HD/SD-SDI and high speed analog signals for simple and complex configurations.
The MatrixPRO-II 3G-SDI line is offered in three models, 8×8, 16×16 and 32×32, in a slim, power efficient package that is 2.2 inches deep. All three models support 3G/HD/SD-SDI signals at bit rates of 19.4Mbps to 3Gbps. Reclockers are standard on all three models. The routers can be controlled from the front panel, Ethernet or RS-232. A redundant power supply option is also available.
Barco’s MatrixPRO-II analog series is offered in three configurations: 12×8, 16×16 and 32×32. All three configurations are available with an audio option and the 12×8 and 16×16 models are also offered with an optional cable equalization feature. The MatrixPRO-II series features bandwidth greater than 600 MHz @ –3 dB with +/- 1.0dB flatness to 300 MHz. This high bandwidth and flat frequency response is designed to allow for image switching and signal distribution without artifacts.The MatrixPRO-II series provides a routing solution of 3G/HD/SD-SDI and analog signals for simple and complex configurations.
Visit www.barco.com/events/pressrelease/2505 for more details.
Viewers of this article also read...
-
Barco DML-1200
The DML-1200 is a moving digital luminaire which can be used as both a bright moving light source and a video projector.
-
Barco intellaspot XT-1
The new intellaspot XT-1, a high lumen output/low wattage automated luminaire targeted to the mid-market, is now available.
-
Barco RLM-W8
Barco's RLM-W8 is a 8,000 lumens, DLP WUXGA projector, designed to bring the saturated colors of three-chip DLPTM projection to events and fixed installations.