Log in
Log in

or
Create an account

or
News
3 comments

Crown Updates Macro-Tech i Series Amps

Enlarge
Add this product to
  • My former gear
  • My current gear
  • My wishlist
Crown MA5000i
Images
1/12
News Crown MA5000i

Crown announced the latest update to its Macro-Tech i series of amplifiers, featuring increased power and new dual port capability.

Comprised of three models, the MA-5000i, MA-9000i, and MA-12000i, the Macro-Tech i series features Class-I circuitry, designed to deliver greater power while reducing the amplifier’s weight by more than half.

The new Macro-Tech i series also features dual-port capability. An additional network port now allows a user to daisy chain the network control down the rack of amplifiers instead of having to run a separate cable from a switch to each individual amplifier.

All Macro-Tech i amplifiers are also equipped with comprehensive status, fault, and load monitoring via standard Harman HiQnet System Architect software, Crown says. A universal power-factor corrected power supply is designed to ensure that the amps can be anywhere in the world.

Power output ratings on the newly updated Macro-Tech i series are as follows:
  • MA-5000i — 3000W per channel at 2 ohms (with 2565W 20mS burst), 2500W per channel at 4 ohms, 1250W per channel at 8 ohms, 4000W at 4 ohms bridged, and 5000W at 8 ohms bridged
  • MA-9000i — 4700W per channel at 2 ohms (with 4570W 20mS burst), 3500W per channel at 4 ohms, 1500W per channel at 8 ohms, 5600W at 4 ohms bridged, and 7000W at 8 ohms bridged
  • MA-12000i — 6000W per channel at 2 ohms (with 5900W 20mS burst), 4500W per channel at 4 ohms, 2100W per channel at 8 ohms, 7500W at 4 ohms bridged, and 9000W at 8 ohms bridged

For more information, visit www.crownaudio.com.
  • bluesbuster 1 post
    bluesbuster
    New AFfiliate
    Posted on 08/28/2010 at 15:27:10
    i have the 9000i amp it has one network port and has less power than 9000i amp listed on the up graded.. --i want to buy another 9000i but want the same power as the power listed when i bought it.. Like 2 ohms 2500 watts--i will need the single network port correct --
  • Michahcim 2 posts
    Michahcim
    New AFfiliate
    Posted on 01/11/2012 at 12:44:02
    I used to own a crown amp but then switch to Spyn Audio power amplifiers like SRX3300

    check that outtttttt :D
    gb
  • Michahcim 2 posts
    Michahcim
    New AFfiliate
    Posted on 01/11/2012 at 12:45:18
    Rated Power
    1 kHz,THD+N=0.1% 8 ohms stereo 2 x 1200W
    4 ohms stereo 2 x 1650W
    2 ohms stereo 2 x 2200W
    8 ohms bridge 3300W
    4 ohms bridge 4400W
    Protection DC protection Yes
    Short circuit protection Yes
    High temperature protection Yes
    Current inrush protection Yes
    Input over load protection
    (limiter) Yes
    Output over load protection Yes
    Soft startup protection Yes
    Frequency response
    1W 8 ohms stereo 20 Hz–20 kHz (+/0.5dB)
    Sensitivity
    8 ohms stereo, 1kHz 0.775V, /32dB, /36dB
    Mode Stereo / Bridge / Parallel
    Fan speed regulation Two-speed
    Connectors (Each channel) Input connectors 1/4” Jack & Female Neutrik XLR
    Output connectors Binding post & Speakon
    (Neutrik)
    Filter capability 10000uF/100V x 12
    Input impedance Balanced 20K
    Unbalanced 10K
    Crosstalk
    20 Hz~20 kHz
    Rated Power 8 ohms ≥60dB
    S/N ratio Rated Power 8 ohms ≤100dB
    Damping factor 1kHz, 8 ohms 650
    Intermodulation distortion ≤0.5%
    Total harmonic distortion
    Phase response 1W, 8 ohms 20 Hz–20 kHz Within ±10°
    Slew rate ≥25V/us
    Output Circuitry Class H+
    Dimensions
    W x H x D 19 x 5 x 19 inches
    482 x 132 x 483 mm
    Rack Space 3U
    Weight 83 Lbs./32 Kg

    got this from there site~

Would you like to comment this news item?

Log in
Become a member

Viewers of this article also read...