APK 4500 classified ad
Alerte nouvelle annonceImages
Reviews
4.0/5(5 reviews)
60 %
20 %
20 %
Write a user review
lucke2Published on 12/13/05 at 06:55 (This content has been automatically translated from French)
The power leaving only the name 15 years old !!!!!
Made in China comes from the same factory boost and other low-end products!
is that price which might have to buy one?
amp powers not taking ads, no sav ect .......
musically
Made in China comes from the same factory boost and other low-end products!
is that price which might have to buy one?
amp powers not taking ads, no sav ect .......
musically
02
»
condos51Published on 09/13/06 at 11:24 (This content has been automatically translated from French)
This is an amp as robust as the jumbo 1000 in the same era, for cons, I use it since 1982!
I love his six transistors per channel for "only" 225W RMS into 4 ohms (one pair and now it's all) but the more transistors that quipent MJ15001 and MJ15002 are of 200W each.
He has a hell of PCHE (prvoir speakers that are not low-end), that the bass is impressive dvelloppe (20Hz-3dB full power)
I also like the Input connectors: RCA, XLR or jack, enough to make others jealous amps.
The price of purchased new silent 4990FF is 760.72 euros
I tried other models of amps that I had but nothing like prt, cot it looked hifi amps ...
sre one thing is: It would be again, I remake.
15kg...…
I love his six transistors per channel for "only" 225W RMS into 4 ohms (one pair and now it's all) but the more transistors that quipent MJ15001 and MJ15002 are of 200W each.
He has a hell of PCHE (prvoir speakers that are not low-end), that the bass is impressive dvelloppe (20Hz-3dB full power)
I also like the Input connectors: RCA, XLR or jack, enough to make others jealous amps.
The price of purchased new silent 4990FF is 760.72 euros
I tried other models of amps that I had but nothing like prt, cot it looked hifi amps ...
sre one thing is: It would be again, I remake.
15kg...…
Read more
This is an amp as robust as the jumbo 1000 in the same era, for cons, I use it since 1982!
I love his six transistors per channel for "only" 225W RMS into 4 ohms (one pair and now it's all) but the more transistors that quipent MJ15001 and MJ15002 are of 200W each.
He has a hell of PCHE (prvoir speakers that are not low-end), that the bass is impressive dvelloppe (20Hz-3dB full power)
I also like the Input connectors: RCA, XLR or jack, enough to make others jealous amps.
The price of purchased new silent 4990FF is 760.72 euros
I tried other models of amps that I had but nothing like prt, cot it looked hifi amps ...
sre one thing is: It would be again, I remake.
15kg for the 450w rms amp is impressive especially in 3U
One important thing: this amp has more than 20 years, it is true that the hardware power rcents made in china have nothing to envy to their former power amps taient made in France! ! !
over these old amps designed with security margins of the era of the dinosaurs are: heavy balls, and immortals.
I have three other amps with more power at least 20 years and though I use it constantly flat out they never let me go in the legs ...
rflchir hsitez but not if you have the opportunity to acquire a ...
if you are not intrrss contact me I will buy it.
I love his six transistors per channel for "only" 225W RMS into 4 ohms (one pair and now it's all) but the more transistors that quipent MJ15001 and MJ15002 are of 200W each.
He has a hell of PCHE (prvoir speakers that are not low-end), that the bass is impressive dvelloppe (20Hz-3dB full power)
I also like the Input connectors: RCA, XLR or jack, enough to make others jealous amps.
The price of purchased new silent 4990FF is 760.72 euros
I tried other models of amps that I had but nothing like prt, cot it looked hifi amps ...
sre one thing is: It would be again, I remake.
15kg for the 450w rms amp is impressive especially in 3U
One important thing: this amp has more than 20 years, it is true that the hardware power rcents made in china have nothing to envy to their former power amps taient made in France! ! !
over these old amps designed with security margins of the era of the dinosaurs are: heavy balls, and immortals.
I have three other amps with more power at least 20 years and though I use it constantly flat out they never let me go in the legs ...
rflchir hsitez but not if you have the opportunity to acquire a ...
if you are not intrrss contact me I will buy it.
See less
30
»
Jr@Published on 10/12/06 at 08:42 (This content has been automatically translated from French)
AKP only use my 4500 for 3 years while the amp was made 25 years ago.
He had quite a little down but nothing too serious. I bought a store PA who uses their rental fleet. The seller told me he had been recovered in a nightclub after a renovation.
This behemoth of steel and copper has a perfect sound in my ear, the 2X225W are more than this. I use it with a pair of homemade HP SP25PA consist of two (125W rms 8H 97dB) and an MHD 152 (75W RMS 105dB 8H). This all gives me a great satisfaction. The lack of serious (all relative) at HP is simply offset by a subwoofer amplifier, also homemade.
I also use it in Hi-Fi but is the classic trasfo proved too noisy for quiet listening.
For...…
He had quite a little down but nothing too serious. I bought a store PA who uses their rental fleet. The seller told me he had been recovered in a nightclub after a renovation.
This behemoth of steel and copper has a perfect sound in my ear, the 2X225W are more than this. I use it with a pair of homemade HP SP25PA consist of two (125W rms 8H 97dB) and an MHD 152 (75W RMS 105dB 8H). This all gives me a great satisfaction. The lack of serious (all relative) at HP is simply offset by a subwoofer amplifier, also homemade.
I also use it in Hi-Fi but is the classic trasfo proved too noisy for quiet listening.
For...…
Read more
AKP only use my 4500 for 3 years while the amp was made 25 years ago.
He had quite a little down but nothing too serious. I bought a store PA who uses their rental fleet. The seller told me he had been recovered in a nightclub after a renovation.
This behemoth of steel and copper has a perfect sound in my ear, the 2X225W are more than this. I use it with a pair of homemade HP SP25PA consist of two (125W rms 8H 97dB) and an MHD 152 (75W RMS 105dB 8H). This all gives me a great satisfaction. The lack of serious (all relative) at HP is simply offset by a subwoofer amplifier, also homemade.
I also use it in Hi-Fi but is the classic trasfo proved too noisy for quiet listening.
For the sound I made with rac bais power and an equalizer. On the side I also put two ventilos end it brings a bit of fresh air.
What I like least
_ Weight
_ Noisy transformer
What I like most
_ Sound quality
_ In the real 2X125W 8H, 2X225W in 4H and 8H 450W in bridged mode.
_ Passive dissipation
_ Chosen to design the RCA or XLR Jack (but the input is not balanced)
_ Double the meter (yes it's a little jacky but it's nice graduation Watt)
_the black brushed aluminum front panel
He had quite a little down but nothing too serious. I bought a store PA who uses their rental fleet. The seller told me he had been recovered in a nightclub after a renovation.
This behemoth of steel and copper has a perfect sound in my ear, the 2X225W are more than this. I use it with a pair of homemade HP SP25PA consist of two (125W rms 8H 97dB) and an MHD 152 (75W RMS 105dB 8H). This all gives me a great satisfaction. The lack of serious (all relative) at HP is simply offset by a subwoofer amplifier, also homemade.
I also use it in Hi-Fi but is the classic trasfo proved too noisy for quiet listening.
For the sound I made with rac bais power and an equalizer. On the side I also put two ventilos end it brings a bit of fresh air.
What I like least
_ Weight
_ Noisy transformer
What I like most
_ Sound quality
_ In the real 2X125W 8H, 2X225W in 4H and 8H 450W in bridged mode.
_ Passive dissipation
_ Chosen to design the RCA or XLR Jack (but the input is not balanced)
_ Double the meter (yes it's a little jacky but it's nice graduation Watt)
_the black brushed aluminum front panel
See less
00
»
chte2bPublished on 10/03/07 at 11:44 (This content has been automatically translated from French)
I have used, there are a lot of years over 20 years !!!!.
it really was tough, with real watts, however at the time (mid 80) this amp worth in 7000 frs .. (1100euros) for 2x225watts.
nothing to do with the power of the last years of exixtence brand, actually made in China.
This was due to power made in France, the brand also equipped with many clubs in France and Navarre ..... so totally unjustified comparisons with boost, pad and I do not know what else.
I forgot the default ...... surely the weight !!!!!!.
it really was tough, with real watts, however at the time (mid 80) this amp worth in 7000 frs .. (1100euros) for 2x225watts.
nothing to do with the power of the last years of exixtence brand, actually made in China.
This was due to power made in France, the brand also equipped with many clubs in France and Navarre ..... so totally unjustified comparisons with boost, pad and I do not know what else.
I forgot the default ...... surely the weight !!!!!!.
10
»
Tech. sheet
- Manufacturer: Power Acoustics
- Model: APK 4500
- Category: Dual-Channel Power Amps
- Added in our database on: 06/04/2005
We have no technical specifications for this product
but your help will be much welcomed
»
Other categories in Power Amplifiers
Other names: apk 4500, apk4500