Log in
Log in

or
Create an account

or
Add this product to
  • My former gear
  • My current gear
  • My wishlist
Digidesign Pro Tools 7
Images
1/37

Digidesign Pro Tools 7

General Sequencer from Digidesign belonging to the Pro Tools 7 series

4 reviews

Pro Tools 7 classified ad

Alerte nouvelle annonce

Images

Tips & Tutorials

Reviews

3.7/5
(4 reviews)
50 %
(2 reviews)
50 %
(2 reviews)
Write a user review
Camhi sebastienCamhi sebastien

Digidesign Pro Tools 7Published on 08/02/06 at 00:25
(This content has been automatically translated from French)
The installation is done without problems effectively.
But then stay for good luck.

ADQUATION / PERFORMANCE

I use Pro-tools since its 7 came out, and it is unmanageable!
version does not stop planting, projects start to freeze for no reason, it is obliged to recreate a session and put everything back in place. (If of course we did take the tps consolidate and export its taken otherwise good luck again)
In short, just last night I was 12 hours of work that are fallen to the water because of ca
(A session once the plant is no longer recuperable plant remains, while another walk, mystery)
I STRONGLY RECOMMENDED SKIP TO VERSION 7 or 7.1 version 6.9 worked very well if you...…
Read more
The installation is done without problems effectively.
But then stay for good luck.

ADQUATION / PERFORMANCE

I use Pro-tools since its 7 came out, and it is unmanageable!
version does not stop planting, projects start to freeze for no reason, it is obliged to recreate a session and put everything back in place. (If of course we did take the tps consolidate and export its taken otherwise good luck again)
In short, just last night I was 12 hours of work that are fallen to the water because of ca
(A session once the plant is no longer recuperable plant remains, while another walk, mystery)
I STRONGLY RECOMMENDED SKIP TO VERSION 7 or 7.1 version 6.9 worked very well if you keep the ...

NOTICE GLOBAL

It should not be astonished if everyone gets a boycotting the junket pro-tools ...
(By the phone support is more than average) expect good 2 or 3 days to have someone online ... (rock n roll ...)

(My current version is Pro-tools LE 7.1 CS9)
See less
»
nicko97nicko97

PROTOOLS!

Digidesign Pro Tools 7Published on 10/15/12 at 10:30
(This content has been automatically translated from French)
intallation is done without problem, general configuration easy
no incompatibility manual clear

SUITABILITY/PERFORMANCE

I used windows vita intel core duo, 2giga ram with a sound card digidesign mbox 2, the software works well in this configuration, some bugs (blue screen or frozen screen) I had the problem 3 or 4 times in 3 years of use, hardware / software fairly stable

OVERALL OPINION

I used it for 3 years now I've been a PT10 mac os,
this is my first real software "pro" recording I used before (audacity xp)
+ the exchange session with another user protools,
the - export the tracks should be 1 per 1 and in real-time on a piece of 5 minutes with 20 tracks it's sport,...…
Read more
intallation is done without problem, general configuration easy
no incompatibility manual clear

SUITABILITY/PERFORMANCE

I used windows vita intel core duo, 2giga ram with a sound card digidesign mbox 2, the software works well in this configuration, some bugs (blue screen or frozen screen) I had the problem 3 or 4 times in 3 years of use, hardware / software fairly stable

OVERALL OPINION

I used it for 3 years now I've been a PT10 mac os,
this is my first real software "pro" recording I used before (audacity xp)
+ the exchange session with another user protools,
the - export the tracks should be 1 per 1 and in real-time on a piece of 5 minutes with 20 tracks it's sport, and forced to go into the menu to import tracks (fortunately with version 10 is the point negative is solved, now we just drag the track in the software window)
See less
»
Studio ratStudio rat

Digidesign Pro Tools 7Published on 01/30/07 at 05:21
(This content has been automatically translated from French)
Installation on Mac, without problem ...
PC is a bit like playing Russian roulette, you have intrt exactementla config prconise (expensive!)

SUITABILITY/PERFORMANCE

Yes, it will run, but it's delicious. Excellent audio quality, true, but considering the price of the hardware, fortunately!
It did everything we asked, but rather less than the competition

OVERALL OPINION

It's been ten years that I use the main pro squenceurs march (Digital Performer, Nuendo, Logic and proutools), I classify it dead last because:
- For prixd'un Systm pro tools full j'achte Nuendo 3, Apogee converters and Studer (better than the HD3) of John Hardy or Millennia pramps (apprcieront connoisseurs),...…
Read more
Installation on Mac, without problem ...
PC is a bit like playing Russian roulette, you have intrt exactementla config prconise (expensive!)

SUITABILITY/PERFORMANCE

Yes, it will run, but it's delicious. Excellent audio quality, true, but considering the price of the hardware, fortunately!
It did everything we asked, but rather less than the competition

OVERALL OPINION

It's been ten years that I use the main pro squenceurs march (Digital Performer, Nuendo, Logic and proutools), I classify it dead last because:
- For prixd'un Systm pro tools full j'achte Nuendo 3, Apogee converters and Studer (better than the HD3) of John Hardy or Millennia pramps (apprcieront connoisseurs), the RME or Motu in sync and MIDI: ca runs better, sounds better and I still have something to change your car and call my girlfriend ... in Mauritius!
- Pro tools that only runs on Mac and résumé to the LORD dbat Maciste between sectarian and litistes PCistes mowing and naive, the only problem the PC is Windows! So if you have a bank account with at least 5 zros and that you are a bit lazy, buy a mac: one branch is running. But If you are not the annuitant and you're not afraid to put the head under the hood, buy a big dual-core PC, do not plug it on the internet, disable all windows services you can, remove the funds notches, screensavers and all but pretty hungry gadgets XPpro, have a look on the forums a little pro and you have a machine running as well as all major Mac market and you can invite your girlfriend and her mom in a good restaurant with ... couraging SAVINGS!
- Bob Clearmountain (I think) said, "what is important to complete the planning of a studio, not the quality of hardware, but its look, if your mixer is large enough to land a jet, you refuse CANCEIS "Today, producers, musicians and DA (which there often know very little) frtillent happily if you talk Neumann, SSL, and Pro- Tools (I just finished a project with a musician who prfr work on his Pro-Tools LE and Digi 02 plutt to try the Systm Nuendo3/RME I proposed, shame the sound and speed of work, but happens all the time!). If you and your honntes not deaf, speak their C12, RCA, Cole, Neve VR, and Nuendo, but do not push too much, you could become chmeur ...
- I often need to work with MIDI, intger of virtual instruments, to edit the waves of flies, the grate of Monitoring complex to compile virtual tracks (re-re) , to edit the tracks and everything rlles or pro-tools does not know how to do it, or it trs long and not practical. It is more convenient if you're just in the post-production video (still!)
- The current crisis in the studio ncessite we have good tools at a reasonable price in order to stay COMPTITE then arrtons to submit the dictatorship Pro-tools/SSL and try to convince our customers that can do better for less. Refuse to mastering-8dB RMS, as some will hear again the Difference between MP3, CD and analog, and resume the hard sell, do our mtier with inventiveness and comptence honntet like old times, and at least the music will thank us ...
See less
»
TotoToto

Digidesign Pro Tools 7Published on 10/04/07 at 16:28
(This content has been automatically translated from French)
No problem for installation with Digi002 of Pc had seen the need chipset E875 before buying at the moment (3 or 4 years ...) all is well
Xp service to a minimum (but with internet and antivir) ... What would I do anyway
The manual sucks but damn well as a manual

SUITABILITY/PERFORMANCE

Intel 2.8G
asus p. ..
1G ram
FireConnect adaptec
In 96 kHz limit 48khz but largely comfortable.
Never lost a single track recorded very stable but when he plugs too yay it swells a little

OVERALL OPINION

4 years
It is large magneto even if I never had
Cubase There's too many windows and I know not well Logic and Nuendo compared to my old Isis guilemot hehhehe ... but it's not the...…
Read more
No problem for installation with Digi002 of Pc had seen the need chipset E875 before buying at the moment (3 or 4 years ...) all is well
Xp service to a minimum (but with internet and antivir) ... What would I do anyway
The manual sucks but damn well as a manual

SUITABILITY/PERFORMANCE

Intel 2.8G
asus p. ..
1G ram
FireConnect adaptec
In 96 kHz limit 48khz but largely comfortable.
Never lost a single track recorded very stable but when he plugs too yay it swells a little

OVERALL OPINION

4 years
It is large magneto even if I never had
Cubase There's too many windows and I know not well Logic and Nuendo compared to my old Isis guilemot hehhehe ... but it's not the same price that's right ...
It's expensive too expensive
Digidesign has released the Digi003 I think I would take it ... or rather the HD ... with a huge new Mac which would also curb the OS anyway ...
See less
»

Tech. sheet

  • Manufacturer: Digidesign
  • Model: Pro Tools 7
  • Series: Pro Tools 7
  • Category: General Sequencers
  • Added in our database on: 12/11/2006

We have no technical specifications for this product
but your help will be much welcomed

»

Other Digidesign general Sequencers

Other categories in Software Sequencers

Other names: pro tools 7, protools7, protools 7, pro tools7