subdirectory_arrow_left subdirectory_arrow_left Distortions
Gear Distortions {{currentManName}}swap_horiz Filter by manufacturer Find a manufacturerkeyboard_arrow_down
  • settings_backup_restore
Distortion… Clean and Simple

Understanding Those Magic Boxes of Doom

So the bad news is, it’s virtually impossible to tell what the distortion pedal sounds like without auditioning it personally.

Most outboard effects behave in predictable ways as you move from manufacturer to manufacturer. For example, you can pick up any brand of digital delay, set at the delay time to 125 ms, the feedback to one repeat and the level to 50%, and get essentially the same, expected sound. Quality issues aside, you can also get predictable results from an EQ. This is a good thing, as it helps you set up the sound you hear in your head on different rigs. But guitar distortion pedals are the “black boxes” of the effects world; they are all unique, inscrutable, and adhere to no known standards for parameter definition. You don’t know how the Tone control is voiced, which harmonics are emphasized as the Distortion knob is cranked, or even what effect the Level control has (such as whether it works dynamically with the other controls or just boosts the existing signal to a louder level). Often the manuals are no help either, preferring not to reveal the mystery of what goes on inside their magic boxes.

So the bad news is, it’s virtually impossible to tell what the distortion pedal sounds like without auditioning it personally. There are no shortcuts, like reading reviews or scanning spec sheets. You just gotta drag yourself down to the local emporium and plug in. The good news is, it gives you an excuse to go shopping! And you can evaluate these disparate mystical contraptions—and even compare and contrast them— by using some basic common sense.

What’s in a Name 1. Behringer’s Blues Overdrive BO100 and the Boss Super Over Drive SD-1. Both feature similarly named controls. The key to the pedals’ tonal character lies in their names.

If you’re seeking a warm bluesy overdrive, you can pretty much a eliminate anything with the word “metal” in the title. Conversely, if you’re trying to make Slipknot’s James Root look like a tone wimp, don’t limit yourself to mere “overdrive” pedals or effects with the word blue or tube in them. Often the best clue to pedals’ sounds are in their names, even if they feature controls that are similarly named, as shown in Fig. 1. You’ll find it’s tough to get any hard information from ads, because companies try to outdo each other with descriptive superlatives.

Also compounding the confusion is that some companies name their controls in a completely nonscientific way. Witness one company that released a pedal with controls called “Butt” and “Face.” The Ibanez Tube King’s Void control is perhaps not as flip, but it’s equally mystifying. Remember though, as odd as these names might strike you, it doesn’t mean the sound is necessarily worse (or better) than a pedal with more conventional named controls. Again, you can’t determine the quality of a pedal sound by looking at it, but you can get clues to its category.

Overdrive, Distortion, and Fuzz 2. It’s pretty clear what you’d use the Ibanez Tube King for. And many of the controls are intuitive. But what’s “Void”?

These terms are all used loosely to describe distortion, but discriminating tone freaks will make distinctions between them. Overdrive is what happens as a signal is pushed beyond the limits of the circuitry’s ability to reproduce the sound faithfully. A slight overdrive has a warm, smooth, and somewhat dull sound that is musically pleasing on a guitar signal. The next category, distortion, covers the widest tonal area, because it includes everything from “just beyond tube warmth” to the brittle buzz saw effect of System of a Down. Within this range is all manner of metal, alternative, hardcore, and industrial timbres. Fuzz is almost a caricature distortion effect, producing a nasally, buzz saw tone that is generally useful only on single node lead lines. It was made famous by Jimi Hendrix (who played a Fuzz Face), and is now called for by name, though many producers use the word generically described any distortion beyond the warm blues furriness. There’s no accepted category for “beyond fuzz,” but certain hardcore adjectives are making their way into the nomenclature, notable metal (see Fig. 3).

Once you have narrowed the sonic field to blues, metal, or subterranean death knell, and are fairly clear on the naming conventions of distortion’s controls, it’s time to check out some pedals. You can do this by going to friends’ houses or visiting the local music shop. But you must be systematic when using your “testing instruments.” You can’t go into a store and try Seymour Duncan’s Lava Box with a Les Paul through the Marshall and expect the unit to behave the same way when you try it in Store B’s Strat and Fender Vibrolux. The best way would be to bring your own rig to the shop. But if that’s not practical, work to get the closest setup at the store to the one you have at home. Hint: approach the store during their downtime so the salespeople will be in a better position to set you up.

Bench Test 3. Though the DigiTech Death Metal has conventionally named controls—Level, Low, Mid, High—the name (not to mention the color scheme!) tells you its tone will be anything but conventional.

Once you have the prospective pedal set up and under your feet, the first thing you should do is establish the pedal’s unity gain setting. That’s the point that produces the same volume level when the pedal is active as when it’s bypassed. This will let you hear the pedal’s effect without the influence of psychoacoustics—that is, the ear responding differently to the same frequencies at varying loudness levels. Typically, your starting levels will look like those in Fig. 4. Kick the panel on and off a couple of times to hear what the pedal does to your tone in its most neutral state. Then slowly crank the distortion control from leftmost to rightmost position, noting not only the differences but how the unit is calibrated—how drastically the unit changes from low to high. Make sure to play real-world examples: lead lines, rhythm figures, arpeggios, percussive, and sustained passages. Then try touching up the sound with the pedal’s tone control. That’s part of the pedal’s character too—how its E.Q interacts with the distortion.

Using EQ with distortion is an important element in tailoring your sound. Generally, the higher the distortion setting, the more treble you’ll need to add. The reason is that the more distorted your signal, the more compressed it becomes, and compression rolls off high frequencies. But should you use the pedal’s EQ or your amp’s? Or an outboard EQ? And if you use an outboard EQ, should it come before or after the distortion? Only your ear can decide. Just remember this paraphrase from Woody Allen: If it’s not done dirty, it’s not done right. He was talking about guitar tone, right?

This article was originally published on Harmony Central.  Reprinted by permission.