UM-2EX classified ad
Alerte nouvelle annonceImages
Reviews
3.7/5(3 reviews)
33 %
33 %
33 %
Write a user review
Mötoo - KissMee RecordsImpec
Published on 04/21/14 at 10:01 (This content has been automatically translated from French)In fact, this review is just to rectify that say very negative reviews below.
This interface works very well, maybe he should not enable advanced driver (a switch to move) or simply interface is broken ...
UTILIZATION
it also happens that breaks interface must stop raving! ...
YES because I have a Berigher FCB 1010 with UNO chip, so I can confirm that dumps walk impeccable with this interface!
Class compliant, thus work on Ipad with CCK, and nothing more ... Marche also through a USB hub, which foot ...
OVERALL OPINION
It works just perfect, everything works fine.
It is class compliant and works nickel with an Ipad, then good ... at this price ... …
This interface works very well, maybe he should not enable advanced driver (a switch to move) or simply interface is broken ...
UTILIZATION
it also happens that breaks interface must stop raving! ...
YES because I have a Berigher FCB 1010 with UNO chip, so I can confirm that dumps walk impeccable with this interface!
Class compliant, thus work on Ipad with CCK, and nothing more ... Marche also through a USB hub, which foot ...
OVERALL OPINION
It works just perfect, everything works fine.
It is class compliant and works nickel with an Ipad, then good ... at this price ... …
Read more
In fact, this review is just to rectify that say very negative reviews below.
This interface works very well, maybe he should not enable advanced driver (a switch to move) or simply interface is broken ...
UTILIZATION
it also happens that breaks interface must stop raving! ...
YES because I have a Berigher FCB 1010 with UNO chip, so I can confirm that dumps walk impeccable with this interface!
Class compliant, thus work on Ipad with CCK, and nothing more ... Marche also through a USB hub, which foot ...
OVERALL OPINION
It works just perfect, everything works fine.
It is class compliant and works nickel with an Ipad, then good ... at this price ...
This interface works very well, maybe he should not enable advanced driver (a switch to move) or simply interface is broken ...
UTILIZATION
it also happens that breaks interface must stop raving! ...
YES because I have a Berigher FCB 1010 with UNO chip, so I can confirm that dumps walk impeccable with this interface!
Class compliant, thus work on Ipad with CCK, and nothing more ... Marche also through a USB hub, which foot ...
OVERALL OPINION
It works just perfect, everything works fine.
It is class compliant and works nickel with an Ipad, then good ... at this price ...
See less
10
»
CountanchePublished on 03/30/08 at 14:22 (This content has been automatically translated from French)
-
UTILIZATION
-
OVERALL OPINION
- What technical specifications motivated your choice?
The simplicity IN, OUT and MIDI THROUGH.
- For what purpose?
To "communicate" with my electronic drums (Roland TD6 KX), and in order to save it to PC.
- What is your config (motherboard / CPU / Ram / Hard ,...)?
AMD Athlon 64 X2 Dual
Core Processor 5000 + 2.60 GHz
2 GB of RAM
two hard drives: 40 GB and 300 GB
- Small worries:
Once you install the device was used is very simple (in fact there is nothing to do =) However, on my Systm, if I have the misfortune of having to take dconnecter USB, I'm good to reinstall the drivers when I reconnect.
I do not put the...…
UTILIZATION
-
OVERALL OPINION
- What technical specifications motivated your choice?
The simplicity IN, OUT and MIDI THROUGH.
- For what purpose?
To "communicate" with my electronic drums (Roland TD6 KX), and in order to save it to PC.
- What is your config (motherboard / CPU / Ram / Hard ,...)?
AMD Athlon 64 X2 Dual
Core Processor 5000 + 2.60 GHz
2 GB of RAM
two hard drives: 40 GB and 300 GB
- Small worries:
Once you install the device was used is very simple (in fact there is nothing to do =) However, on my Systm, if I have the misfortune of having to take dconnecter USB, I'm good to reinstall the drivers when I reconnect.
I do not put the...…
Read more
-
UTILIZATION
-
OVERALL OPINION
- What technical specifications motivated your choice?
The simplicity IN, OUT and MIDI THROUGH.
- For what purpose?
To "communicate" with my electronic drums (Roland TD6 KX), and in order to save it to PC.
- What is your config (motherboard / CPU / Ram / Hard ,...)?
AMD Athlon 64 X2 Dual
Core Processor 5000 + 2.60 GHz
2 GB of RAM
two hard drives: 40 GB and 300 GB
- Small worries:
Once you install the device was used is very simple (in fact there is nothing to do =) However, on my Systm, if I have the misfortune of having to take dconnecter USB, I'm good to reinstall the drivers when I reconnect.
I do not put the maximum, this little worry as all of the same embtant the long run.
UTILIZATION
-
OVERALL OPINION
- What technical specifications motivated your choice?
The simplicity IN, OUT and MIDI THROUGH.
- For what purpose?
To "communicate" with my electronic drums (Roland TD6 KX), and in order to save it to PC.
- What is your config (motherboard / CPU / Ram / Hard ,...)?
AMD Athlon 64 X2 Dual
Core Processor 5000 + 2.60 GHz
2 GB of RAM
two hard drives: 40 GB and 300 GB
- Small worries:
Once you install the device was used is very simple (in fact there is nothing to do =) However, on my Systm, if I have the misfortune of having to take dconnecter USB, I'm good to reinstall the drivers when I reconnect.
I do not put the maximum, this little worry as all of the same embtant the long run.
See less
00
»
rico80Published on 01/17/09 at 15:00 (This content has been automatically translated from French)
- What technical characteristics have motivated your choice?
=> 1 between Noon "IN", 2 MIDI outputs "OUT" (supposedly ...)
- For what purpose?
=> Flying VST software
- What is your config (motherboard / CPU / Ram / Disk ,...)?
=> System: DELL Notebook "Latitude D630"
- Which instruments do you use or the systm? ...
=> Used with a FCB1010 to Berhinger
UTILIZATION
- The drivers are stable?
=> Not (see review overall)
- Are they often put day?
=> No, no doc and more on the site EDIROL
- What software do you use most often?
=> Guitar Rig 3
- Do you ever happen to saturate the MIDI interface and if so, under what circumstances?
=> Only the MIDI In works...…
=> 1 between Noon "IN", 2 MIDI outputs "OUT" (supposedly ...)
- For what purpose?
=> Flying VST software
- What is your config (motherboard / CPU / Ram / Disk ,...)?
=> System: DELL Notebook "Latitude D630"
- Which instruments do you use or the systm? ...
=> Used with a FCB1010 to Berhinger
UTILIZATION
- The drivers are stable?
=> Not (see review overall)
- Are they often put day?
=> No, no doc and more on the site EDIROL
- What software do you use most often?
=> Guitar Rig 3
- Do you ever happen to saturate the MIDI interface and if so, under what circumstances?
=> Only the MIDI In works...…
Read more
- What technical characteristics have motivated your choice?
=> 1 between Noon "IN", 2 MIDI outputs "OUT" (supposedly ...)
- For what purpose?
=> Flying VST software
- What is your config (motherboard / CPU / Ram / Disk ,...)?
=> System: DELL Notebook "Latitude D630"
- Which instruments do you use or the systm? ...
=> Used with a FCB1010 to Berhinger
UTILIZATION
- The drivers are stable?
=> Not (see review overall)
- Are they often put day?
=> No, no doc and more on the site EDIROL
- What software do you use most often?
=> Guitar Rig 3
- Do you ever happen to saturate the MIDI interface and if so, under what circumstances?
=> Only the MIDI In works (see review overall)
OVERALL OPINION
Works fine MIDI In, but not in MIDI OUT with the FCB1010, when using the UM-2EX.
(The FCB1010 works well with my desktop PC with MIDI OUT)
Conclusion:
I UM-2EX works well for what is the Midi IN: dumps can be SYSX the FCB1010 to the PC.
I can not do dumps to SYSX FCB1010 ... what is trsgnant (the FCB1010 starts ds error as I connect the MIDI OUT)
Does the problem have also DTECT when removing the USB cable while the PC is turned on (see Reinstalling the drivers ... Previous review)
So not terrible product and I can therefore only the deprecated.
I put "3", knowing that the use of UM-2EX my setup is limited to 1 / 3 of the use that I would do.
=> 1 between Noon "IN", 2 MIDI outputs "OUT" (supposedly ...)
- For what purpose?
=> Flying VST software
- What is your config (motherboard / CPU / Ram / Disk ,...)?
=> System: DELL Notebook "Latitude D630"
- Which instruments do you use or the systm? ...
=> Used with a FCB1010 to Berhinger
UTILIZATION
- The drivers are stable?
=> Not (see review overall)
- Are they often put day?
=> No, no doc and more on the site EDIROL
- What software do you use most often?
=> Guitar Rig 3
- Do you ever happen to saturate the MIDI interface and if so, under what circumstances?
=> Only the MIDI In works (see review overall)
OVERALL OPINION
Works fine MIDI In, but not in MIDI OUT with the FCB1010, when using the UM-2EX.
(The FCB1010 works well with my desktop PC with MIDI OUT)
Conclusion:
I UM-2EX works well for what is the Midi IN: dumps can be SYSX the FCB1010 to the PC.
I can not do dumps to SYSX FCB1010 ... what is trsgnant (the FCB1010 starts ds error as I connect the MIDI OUT)
Does the problem have also DTECT when removing the USB cable while the PC is turned on (see Reinstalling the drivers ... Previous review)
So not terrible product and I can therefore only the deprecated.
I put "3", knowing that the use of UM-2EX my setup is limited to 1 / 3 of the use that I would do.
See less
00
»
Tech. sheet
- Manufacturer: Edirol
- Model: UM-2EX
- Series: UM
- Category: MIDI Interfaces
- Added in our database on: 10/31/2005
We have no technical specifications for this product
but your help will be much welcomed
»
Other categories in Computer Music
Other names: um 2ex, um2ex, um 2 ex, um2 ex