All user reviews of 3/5 for the Behringer FCB1010 Midi Foot Controller

I no longer have this pedal, I sold everything I had midi hardware.
I bought it to check the following things:

Equipment Bass V AMP FOR behringer: thanks to the pedal, it was possible to use the small sampler / looper in the V amp. 40 seconds of sound.
Jem'en servais also to launch the Yamaha QY70, a small sequencer.

Software: I used it to drive Tracktion.

The manual is particularly rotten. J4ai had to write a little tutorial at the time. It took me days to figure out that was not the preset configuration of all peédales, but the settings stored for the pedals.

Once configured, the limit is thru MIDI, leaving messages sometimes go, sometimes not. I had some problems, I had sometimes double tap pedal. But I think it came from the configuration.

After this long grip, I ended up dipping how it worked, and it is something quite versatile. The expression pedal was working.

That was not so bad is that we sent several messages apopuyant pedal. You could put a note message, and another parameter.

I have tried other aps foot controller.

To summarize this opinion a little lousy:

The -: manual rotten, not very intuitive configuration, noon thru the strange behavior.
Pros: lots of things can be programmed, the animal is strong.

If I was recovering at noon with a guitar, I would probably try it first, before looking if others exist.

HELLO EVERYONE!

I immediately find the hardware (behringer fcb 1010 ).... and I not pick up!
I have a hughes & kethner amp Attax 100 which has a 3 channel footswitch (crunch, distortion effects and loops), a multi effects tc electronics m300 and ze pdalier fcb 1010. Until now, to move from a clear, effective channel saturated void, must I press the 2 button footswitch on (1 to turn on the distortion and the other to cut the simultanment = effects loop, and while singing: p c practice!
So here I just want to control the multi and the amp with the same pdalier, but no way to do this;
the amp has a jack on the front of the amp for the footswitch that looks like a MIDI but not the same format. Any fawn, Mr. Behringer said that you go through jacks, and besides, you all talked about mono plugs and jacks Stereo: what is the difference? What should I do? And if you know my amp, my wish is it couraging?
thank you in advance.

I use for 2 years.
Report qualitprix rather good.
Robust.
Easy hack and rpar.
I use it with keyboards. We regret the impossibility of reversing the positions Work / Rest of the relay sustains the keyboard does not work all the same according to the manufacturers. Why not for MIDI sustains you tell me? was not always possible ...
The pedals are expressions for paramtres dgrossir like wha wha but in terms of "touchquot; is not great and not at all prcis. For orders of volumes by example, it trs galre to do something to clean without a rglage approximate trsdsaglable to get (finally) to the result expected ...
impossible to change MIDI channel along the way, too bad.
practical and function between MIDI MERGE / OUT, quickly buying a Merger.
Programming a little archaque but effective and fast enough with all of the same habit.
The internal power supply transformer is ultra loud ... impressive ...
With exprience, this choice probably would do for the quality aspect ratio product price. remains a good and a trs trs reliable MIDI controller, not that complicated to program.

I possde this pdalier Controller twelve o'clock for about 6 months now. What I DCID to purchase is the price (180 euros bought new in a store prs de Strasbourg), its CHARACTERISTICS (2 volume pedals), his 10 against their ...

I bought it to drive my JMP1/G-Major couple.

In the end, rsultat races: the switches are solid trs, especially not trsractifs: other time when I almost on a preset, the MIDI signal goes wrong (I tend to a problem me to switch), and suddenly I was not change the channel of the preamp or multi ... Gnant is live!

The volume pedals too ... Effective only a quarter of their race, and especially imprcises!

Otherwise it's a part in pdalier trs simple setup (it yammer possibility to edit the presets on the PC, the coup is a childlike simplicity to quiquonque has never express the MIDI programming). The power supply intgre is a plus, and there is no hum. Steering can be a Vamp (there is a kind of prreglage for AAPC).

With exprience, I do not referrer this choice, it is clearly not the height of a Rocktron Midimate example (the expression pedals and less) that I had in my dj possession (and I'm going to buy ELSEWHERE instead of my FCB1010). Construction is a cheap (just normal considering the price you will tell me). I put my 5 for the same CHARACTERISTICS when and ease of programming. Demanding users beware!

Used for a year, for use with an Axe Fx Before I used a Digitech pedal LE2101 with a dedicated Control, of course, a little luxury for display with the names of the patches, instant access everywhere tuner to display ... etc
What is the FCB is to have 2 expression pedals built into the MIDI board cheap, robust and works satisfactorily for simple manipulations (patchchanges, stompboxes, controls external variables accessible via MIDI CC) .
The obvious disadvantages: its sheer size and display very limited. Can not send codes SYSEX for direct access to all axis parameters.
The solution that does everything I want would cost over 600, - Euro thus effectively the value price of 1010 is unbeatable. Unless unexpected windfall came in large qty I do not change soon.
However: the design too large, the operation and the weight will start to be these days and if a new version out Behringer below 250Euro Likelihood I would change "the next day."
Side config I'm using the version Uno, programming only and easily with the computer on soft FCB_editor V2.1 Java. It can be set directly on the pedal but the manipulations to dissuade me of this procedure, too bad for small changes in repeated and all controls are done with a laptop or at home.