All user reviews for the Numark TT1650

Used to replace one of my mk2 review.
I have two mk2, I also had 2 ttx, 2 stanton str8-80, 2 vestax pdx 2300 ....
This board for listening to mix ok but this is misery.
The plate made toy, not stable plateau, the same pitch I'm not talking!
The guy who says he is thrilled with ben fucking who is this is not what is the mix ... lol
Ideally I think two good vestax 300 euros the pair currently using to play the mk2 I like is with this that I start to chug if at numark tt 500 nickel moin expensive than ttx and as robust as moin of electronic ...

For the cheap price but use platinum as listening to play with but at the same evening not worth it.

I use this board for one year soon, I must say that this departure was a short-term solution, which is extended ...
I tried the stanton t62, t80 and Technics SL1200 MK2
this plate has a plastic look really repels and a button at startup that sounds like a bong hit, horrrrrible sound plastic to me real low point of the plate.
what I like most about this deck:

- Its price because it must say it is really not expensive
- Its sound (used with a good cell obviously)

What I like least:

- It looks really put off, and even plastic plastic plastic
- Relatively low torque

With the experience I probably will not remake this choice, I would opt for a solid platinum, with an adjustment as the weight of the arm and more precise plastic, plastic!

How long have you been using?

-Since about 1 month

What is so special that you like most and least?

- Pros: The price (<200 €)
- Less: Torque too low, Pitch imprecise aspect "toc" (plastic shell) ...
In addition one of my turntables engine misfires, it seeks its meaning cranking ... Weird!

Did you try many other models before buying it?

-Technics MKII Numark TT500, Synq Xtrem-1, Stanton st-100, str8-150 ...

With experience, you do again this choice?

-In barely a month, I already want to sell the plates and the double limit invest in a pair of TT500.

- How long have you use it?

For me following a beginners, it will be 6 months!

- What is the particular feature you like best and least?

Frankly, there is no default, it is perfect to start with me, but now I want to go to the MODEL above, the TT-200, to enjoy a couple more powerful engine and a handy reverse function!

- Have you tried many other models before acqurir?

Uh no, but I t's not!

- How do you report qualitprix?

IM-BA-TTABLE! nan really, it is of excellent quality with an aluminum finish and an excellent design ... nan no complaints!

- With the exprience, you do again this choice? ...

Yes of course, but if I screw up in 10 years I would take a ttx-1

It's been 2 years that I mix on the decks, well frankly if you're not a nag is an excellent quality-price (especially now). I mix some prs 1 hour per day and 5 hours on weekends, and up Submitted I have not had any problem.
What is regrettable is the absence of a strobe for the variance of pitch, and a lack of lightweight precision of the latter (but this problem is found on all Numark any fa on).

Although robustness is not that of technics, if you beginners I advise you, because it is not the problem that encountered TTX (engine overheating ...) and is not so fragile that suggests some people. However, for the scratch (I mix of house and club), it is still the same prfrable avoid, opt for a TT500, then a mk2 or a PDX if you see things great.

Weastman

- How long have you use it?

Introduced to the joys of the mix for over a year, I have started by buying the numark 1650.Au after 6 months of use I realized ke to progress in the ruthless world of Djiing needed hsit make your piggy bank pter shaped cochon.Ya Mystra not any fawn, if you want to move in and out of phases musically correct fo invest in the quality of gear.

- What is the particular feature you like best and least?

more less ke more!

She is sorely lacking torque
Plateau and unstable arms imprcis
Dsastreux-pitch
Toy-look to your bb you will feel kel pter hands

- Have you tried many other models before acqurir?

gemini XL 500/Numark TTX / MKII .. and .. and of course!

- How do you report qualitprix?

Good for the guy qualitprix ki beginners and not really know if it will please him

- With the exprience, you do again this choice? ...

Surely not all those .. Tip beginners in this DLIR: leaves invest, I advise you to save 2 more months and purchase the kind of quality gear numark TTX or MKII, AD s as there are brands that make Reloop trs good affordable products like the RP 4000 MKII (check out the comments on the site). Good stuff this is the cl especially hiphop and scratch so invest friend !

- How long have you use it?

I use it for a year now. And she has not moved.

- What is so special that you like most and least?

I like the design Numark. It may lack a bit of torque. It is intended for use in hip-hop position with both "start-stop".

- Have you tried many other models before buying it?

Gemini TT02, Numark TTX, Stanton ST 100 and Technics SL1200 mk2

- How would you rate the quality / price?

Very good. I suggest for those who want to learn djing.

- With experience, you do again this choice? ...

I would opt instead for a ttx.

I use it for four months. What I like most is the engine Entran live, seeing the price. But I add immediately that the scratcher may be owed by the couple.
What I like too much, however, is that I reu the plate with a cable whose mass was malfunctioning. And since it takes a special cable for this board ...
This is my Premire platinum.
The report price is trs good quality: DJ some nights, rather abused during transport, but both drives work like new.
Properly maintaining and treating them well, I think these plates can hold long enough to get your feet well and avoid to Get You Started on a mk2 boussillera that lack of experience, so I prfrable think it is not to start on the gear 500 euros pice: with exprience, I do it again this choice.

For the first time, I turn with pleasure A model low-end brand Numark!

This is rare.
Especially with Numark!

Like any product remaining constant, we must know what it is intended!

If your goal is to scratch diamond plate cras taste cast ... RDV in Technická!

If it is to try and devote time to other pleasures of the scratch, taking care of the hardware ... It can do so.

Not because n'tant Official Dj! I come when even scratch gently Fawn friendly without problem. Her plate is quite stable and surprisingly ca!

Obviously if we balance it over an anvil wobbles ... But when a platinum achte nine 150 euros (yes! You can not read well !!!), rcolte that what is sme ...

To live, she can walk but its shell is plastic and it has no protective cover, so be careful.

Ps The cell comes with Groove Tools is a joke (read: https://fr.audiofanzine.com/produits/avis/index% 2Cidproduit 2C42560.html%)

As a second platinum plate or as apoint COST is perfect.

For my part, I buy for sampler, I did not want to take the head with a belt (the Numark 1510), a shelf stable enough to return to the rear when a sample I like, look Hip Hop, a nice price and a solid cot!

H well I'm in heaven! I coupled with a cell Ortofond OM set and it's bliss!

The report qualitprix is ​​excellent and everything I sit there.

I do not put the maximum for it even when the Numark and although having recently, I'm waiting to see if its solid persists over time (for intant, no worries)

My friends, you know me!

How long have you use it?
I use it for a year

What is so special that you like most and least?
what is nice is the price.

Cons:
- The next super plastic
- The fact that the arm jumps all the time I do not know if we can say that there really is an anti skating on this deck, I scratch it with this board I spend only break beat.
- The couple is quite disastrous
Have you tried many other models before buying it?
yes: technics mk2, gemini (quickly), TT500 (I have also elsewhere)
How would you rate the quality / price?
ba is really cheap, but really limited. value for money is still pretty average. but I have not tested a lot of platinum in this price range so I do not know.

With experience, you do again this choice?
can be before I would look ds this price there is not one with a higher torque.

to conclude it is a model to start, but do not expect too much from it just allows it to get an idea of ​​djing, dc is really to test then I think it's better attentre and s buy a 500 tt or mk2 example for those who like technics (in my opinion)

(Scratch)
Here it's more than a year since I practice often scratch and I could try the TT1650.
YES, the couple is very poor,
YES, arm jumps, the plate is light etc ...
At home I have a mk2 and I also tried the numarkTTX: totally incomparable, the TT1650 is a toy next to it.

BUT

It is possible to scratch with.
On the TT1650, the slightest gesture too sudden blew up the arms, but if you can play on this one, you shall not do any more jumping arms, and it is possible, I did. The first time was sucks, it jumped all the time, but now after a year of training, it's going very well.
When you hear the scratch, you must train to make movements smooth and delicate, and néamoins fast and low-end Platinum is ideal for learning that.
When you start:
We do not yet know if we're going to practice long
We do not know how he plays (because is not)
There is nag
ESPECIALLY DO NOT PUT IN ITS FIRST € 400 PLATINUM!

I have done this mistake because everyone says it is impossible to scratch with decks like that. But SI.
The scratch is very hard. Even I, who loves hip-hop and all that, I think he must really be very hard to scratch something pretty and musical. Believe me, start on a technics mk2 or a vestaxPDX-600 €, it changes very little at the sound result ...

I think the quality of the crossfader is more important than the couple or the holding arm of the plate.