Thread Getting a hum when I use the stock microphone (Phantom Power)

1 comment
2 participants
702 views
2 followers

iamdivide

New AFfiliate

First post

1 Posted on 06/22/2018 at 17:10:22

Hey guys, I've been having some strange issues with my 2i2. When I'm using phantom power (and only then), there's a hum in the recording that only goes away if I touch the XLR input at the 2i2's port. I've tried using different cables, different USB ports, and using the other input but I haven't gotten anywhere. Anyone know why this is happening?

angelie

350

AFfluent Poster

2 Posted on 06/23/2018 at 06:02:04

Hi,

Does this happen only with that mic or with all mics? Does this happen when you switch on phantom power without a mic connected?

If your answer is yes on the second question there could be a faulty condensor inside your interface which should filter out the DC voltage of the phantom power but it can't

You said : if i touch the xlr port..... What part of the connector do you touch and is the mic plugged in? If mic is plugged in and you touch the casing of the xlr port and the hum dissappear it cod be a ground loop / faulty ground connection inside your microphone....

Do you have other information for us so we can explore your problem together..

- Angelie

It's not about what you got to use .... but how you use what you got...

< Thread list
Rules

List of moderators