View other reviews for this product:
le maitre des marionettes
Published on 01/22/06 at 06:42
8 inputs simultaneously with pramplifies neutrik connections.
8 line level outputs
I / O SP / DIF
MIDI input / output
main output
Cue mix
headphone
possibility phantom power for all inputs
rglage mix of input / playback the COST
on an AMD 2800 + barton with hard drives in Raid 0 1 GB ram in Dual DDR, the card connects with a firewire cable
UTILIZATION
- Quick and updated firmware to chain multiple FIREPOD.
- Cubase SX2 I had some problems to enable I / O VST, but it comes from my non-updated version ... Nothing serious because I rsolu the problem quickly.
- The manual is short and trs in English but this card is simple and does not ncessite hours of grip due to the obviousness of connections and rglages.
GETTING STARTED
- Perfect Stabilit of drivers (drivers rcents)
- For use with Cubase LE and Cubase SX2
- Latency is moderately good CEZ 4ms I see 5 in order to mix ... adequate but not exceptional
- You can record 8 mics + a SP / DIF both
- We can not return rgler indpendants each entry requires a mixer downstream of the card, but I do not drang.
- Sometimes I get trs frquement clips and various cracks in cubase or even by listening to music with winamp! I trsdu ... I must just restarting and return sync etc ... I thought we had around 700 to more concern about this kind of sound card!
OVERALL OPINION
I use it for one month and I am relatively satisfied, the Acquisition of 8 it's all good tracks simultaneously and a good rendering, pramplis do their job.
As for mixing and use gnral it means I get enough latency levs (stuff for the studio) between 4 and 7 ms for a little room to mix with many tracks (between 20 and 45) and effects ...
Sometimes I have the crackling of costs including software trs simple sum of Winamp!
I Motu 828 mkII possde one is much better, no comparison, but much more expensive and with the NCESS of possder of pramplis ... or a mixer with ADAT.
8 line level outputs
I / O SP / DIF
MIDI input / output
main output
Cue mix
headphone
possibility phantom power for all inputs
rglage mix of input / playback the COST
on an AMD 2800 + barton with hard drives in Raid 0 1 GB ram in Dual DDR, the card connects with a firewire cable
UTILIZATION
- Quick and updated firmware to chain multiple FIREPOD.
- Cubase SX2 I had some problems to enable I / O VST, but it comes from my non-updated version ... Nothing serious because I rsolu the problem quickly.
- The manual is short and trs in English but this card is simple and does not ncessite hours of grip due to the obviousness of connections and rglages.
GETTING STARTED
- Perfect Stabilit of drivers (drivers rcents)
- For use with Cubase LE and Cubase SX2
- Latency is moderately good CEZ 4ms I see 5 in order to mix ... adequate but not exceptional
- You can record 8 mics + a SP / DIF both
- We can not return rgler indpendants each entry requires a mixer downstream of the card, but I do not drang.
- Sometimes I get trs frquement clips and various cracks in cubase or even by listening to music with winamp! I trsdu ... I must just restarting and return sync etc ... I thought we had around 700 to more concern about this kind of sound card!
OVERALL OPINION
I use it for one month and I am relatively satisfied, the Acquisition of 8 it's all good tracks simultaneously and a good rendering, pramplis do their job.
As for mixing and use gnral it means I get enough latency levs (stuff for the studio) between 4 and 7 ms for a little room to mix with many tracks (between 20 and 45) and effects ...
Sometimes I have the crackling of costs including software trs simple sum of Winamp!
I Motu 828 mkII possde one is much better, no comparison, but much more expensive and with the NCESS of possder of pramplis ... or a mixer with ADAT.