Log in
Log in

or
Create an account

or
< All Wilkinson Roller Bridge reviews
Add this product to
  • My former gear
  • My current gear
  • My wishlist
Wilkinson Roller Bridge
Images
1/9
Price engine
Classified Ads
Forums
bert'nortt' bert'nortt'

«  excellent »

Published on 03/18/13 at 02:08
I apologize, but I notice radically opposed, it is an excellent chevalet.Je have not met specific constraint on sliding "drawer" ....
-Because the direction of tilt locking screws imperceptibly "the carriages." Multiplied by six it's enough effort to block the game. If these constraints are present it is enough to loosen groups of 2 or 3 personally in case of blockage, sometimes I also loosen the six release all and then I tighten a bit.
-Except that we rule out other actually maintain a small pressure (me, I let almost free). En suite to provide is varied race by pushing the "more or less and must be used by key action is very sensitive ... " Helped by the ... pressure of the strings, normally it should remain in place setting time .. Again feel free to ... If I do not fix it, I stiffened, still very / slightly 1-1 and after a final check I block 6 without exaggeration at the end of the intervention ... All in less than 5 minutes ...
By pushing action-especially with a piece of plastic rigid, you never know, with a peak metal screwdriver slips if you can scratch the table ... (Something I did not have to do indeed act as a last resort on the edge of drawers, with a "tape flange household" if sandpaper 400 or 600 ", laid flat on a table" rub one t'peti 'little' so that their protections do not suffer Chrome ...).
Setting-action normal screws ink also provided with oblong holes and can easily influence its direction by changing the angle of parallelism (pointaux screws are provided for locking.) Being more " mastoc "with its drawers is superior to the other fitted with screw on archtop acoustic transfer or rigid table is better secured and more conventional.