Log in
Log in

or
Create an account

or
< All Palmer PDI 06 MkII "The Sponge" reviews
Add this product to
  • My former gear
  • My current gear
  • My wishlist
Palmer PDI 06 MkII "The Sponge"
Images
1/52
Palmer PDI 06 MkII "The Sponge"
Price engine
Classified Ads
Forums
ricoute ricoute

«  good camera but can not be sufficient in some cases! »

Published on 04/05/13 at 12:32
Since my one week

I had no confidence in the brand Palmer, and wished not to 300/400 (eg koch)

THE particularity nothing to report, except the cabinet and construction sounds serious.

Least, be forced to choose a model with a specific impedance (in this case 8 ohms but some are rather vintage hp to 16 ohms) so it's a disadvantage (especially lorqu'on a head + cab and considering that at one time or another to change cab)
It may either be limited by the choice d of a cab depending on the impedance data (the universal version 8ohms) in the choice of cab or override, and have pdi06 unusable and useless and suddenly !

Towards the seriousness and construction the R / P / Q is very satisfying


The manual is not too explanatory in nature cables to use, they have been supplied with, it would have been better.

because there are 2 connections:
- 1 output to the head into the socket of the rated amp pdi
- 1 of the IDP in cab

is the head of the IDPs, I asked myself whether we could get a cable modulation (like the amp in a pedal) or had to be put also a cable connection type hp mark? ??

My rant (well in my config) carvin V3M head of cabinet and black mesa with hp Ev
I puvais use but according to the positions of 0.5 to 1 position MAster

I thought logically (my amp is only 50w and still I do not use that 22w) with the position providing the greater attenuation of the signal by 18%, I could not get the master that position master 2.5, therefore fundamentally insufficient attenuation factor issue in my case (I would have liked to be able to master the 4 or 5 without problem.
No significant change in terms of use but, despite its attractive price, can not be sufficient.
The use of pdi06 does not suit me ... just not, and is returned directly to the store.

You will probably consider that my conclusion not not be good, but I'll qualify.

Actually, I think a 20/30w amp, the 18% maximum attenuation could go, but the great powers, it is not usable, even if the sending carvin heavy anyway!

On the other hand, with other models koch or attenuation is the attenuation is 1.2 or 3%, it is clear that this matter attenuation must do!.

But I think the choice of Palmer, can be understood is focused on having a correct attenuation, but not degrade the signal which is even more altered gradually as one moves the attenuation value. The model with the koch Loadbox 2 (350 € does not seem too affected the quality of the signal but crashes when even fairly large dynamic range.

For the IDP 06: I found that there was a clean attenuation and better definition almost intact.
on the other hand in crunch and saturated, the signal is quite altered in its grain and dynamic, with 18% of relative attenuation, the degradation is random (it does not happen all the time) because I wished no change of its (If I take a lamp amp is not amoindir its return), so I decided .... not keep Pdi06

I watched Koch, even the big version 2 does not seem perfect either!
I have not found the solution (and good attenuation without loss of sound and not a price <350 €) and a little fear in the background to add this kind of case sometimes considered detrimental to the output stages of the amplifier.

I think the pDi06 is not a bad camera, but a bit restrictive,
(The previous version of bcp Pdi06 was also more impressive with a knob mitigation manageable continuously like a volume knob was a better idea yet he must have attenuation range up to 5 or 1 %)


So I advise you to try with your config to see if it can agree

As for me, I suspended all research in this field and a friend told me it was a bit weird as accelerated as (thus unlocking the power) and slow at the same (and thus limit), it n ' was perhaps not entirely wrong ....